WiseCalcs

RMD Calculator — Required Minimum Distribution (2026)

Enter last December 31's balance, your age or birth year, the account type, and whether a much younger spouse is the sole beneficiary. The calculator looks up the IRS divisor, shows this year's RMD, and can project later years if you add a growth rate.

Written by Kenneth Schrøder, Founder of WiseCalcs

Updated ·Sources verified

An RMD is the smallest amount you must take from a traditional IRA or most workplace plans once you reach the start age. For 2026, divide last year's year-end balance by the Table III factor for your age — 24.6 at 75, so $500,000 becomes $20,325.20.

USD

Use the year-end value on last December 31, before this year's contribution or distribution. That is the IRS figure, not today's balance.

Your age as of your birthday in the distribution year. If you also enter a birth year, the birth year is used for age and for the start-age rule.

Used to apply the SECURE 2.0 start age: 73 if you were born in 1951–1959, 75 if you were born in 1960 or later.

The calendar year this RMD is for. The 2026 RMD uses the December 31, 2025 balance.

IRA RMDs can be taken from one IRA in total. Each 401(k) or 403(b) must be distributed on its own. Inherited IRAs are not calculated here.

Table II applies only if your spouse is the sole beneficiary and is more than 10 years younger than you.

%

Optional planning rate used only to project later RMDs. The calculator does not look up a market return. Leave at 0 to hold the balance flat after each RMD.

This year's RMD

$20,325.20

Distribution period (divisor): 24.6

Distribution period (divisor)
24.6
IRS table used
Table III — Uniform Lifetime
RMD start age
73
First RMD deadline
December 31, 2026
This year's RMD and later years

Each bar is that year's required withdrawal. Later years assume you take the RMD and the remaining balance then grows at the rate you entered until the next December 31.

Projected future RMDs

Projected future RMDs
YearAgePrior Dec 31 balanceDivisorRMD
202675$500,000.0024.6$20,325.20
202776$503,658.5423.7$21,251.42
202877$506,527.4822.9$22,119.10
202978$508,628.7922$23,119.49
203079$509,784.7721.1$24,160.42
203180$509,905.5720.2$25,242.85
203281$508,895.8519.4$26,231.75
203382$506,797.3118.5$27,394.45
203483$503,373.0017.7$28,439.15
203584$498,680.5416.8$29,683.37
203685$492,447.0316$30,777.94
203786$484,752.5515.2$31,891.61
203887$475,503.9814.4$33,021.11
203988$464,607.0213.7$33,912.92
204089$452,228.8012.9$35,056.50

The headline is this year's required withdrawal. The divisor is the IRS factor for your age. The table name tells you whether Table III or Table II was used. The projection assumes you take each RMD and the leftover then grows at the rate you typed.

How does it work?

Table III comes from the 2022 final regulations in 26 CFR § 1.401(a)(9)-9 and is the same table printed as Table III in Publication 590-B. Use Table II only when the spouse is the sole beneficiary and more than 10 years younger. Inherited IRAs follow different rules and are not calculated here. The first RMD may be delayed until April 1 of the following year; later RMDs are due by December 31. Amounts are shown to the cent; some IRS examples round to the nearest dollar.

Required minimum distribution

RMD=Dec 31 prior-year balanceapplicable denominator\mathrm{RMD}=\frac{\text{Dec 31 prior-year balance}}{\text{applicable denominator}}
balance
Account value at the close of business on December 31 of the year before the distribution year. Publication 590-B uses this date, not the day you calculate.
denominator
Life-expectancy factor from IRS Table III (Uniform Lifetime) or Table II (Joint and Last Survivor) in Publication 590-B Appendix B, using your age — and your spouse's age, if Table II applies — as of the birthday in the distribution year.

A $500,000 IRA on December 31, 2025, for an owner who turns 75 in 2026, uses Table III factor 24.6. $500,000 ÷ 24.6 = $20,325.20. That is the 2026 RMD if the spouse is not the sole beneficiary more than 10 years younger.

Method & sources

The calculator divides last December 31's account balance by the IRS applicable denominator for your age in the distribution year. Most owners use Uniform Lifetime Table III from the 2022 final regulations. Table II is used only when a spouse is the sole beneficiary and more than 10 years younger. Inherited IRAs are explained, not calculated.

Sources

Where this method comes from — use these references to understand the formula, assumptions, and limits.

How we calculate

  • The balance is the account value at the close of business on December 31 of the year before the distribution year, as Publication 590-B requires.
  • Age is your age as of your birthday in the distribution year. A birth year, if entered, is used both for that age and for the SECURE 2.0 start-age rule.
  • People born in 1950 or earlier started RMDs at 72. People born in 1951–1959 start at 73. People born in 1960 or later start at 75, following IRS FAQ materials. The statute's 'attain age 74 after December 31, 2032' wording can be read to include some people born in 1959; this page does not take that reading.
  • Table III is used unless you say the spouse is the sole beneficiary and enter a spouse age more than 10 years younger, in which case Table II is used.
  • The projection assumes you take each year's RMD and the remaining balance then grows at the rate you entered until the next December 31. Actual timing of withdrawals and returns will change later RMDs.
  • You supply the growth rate. The calculator does not look up market returns, tax brackets, or your custodian's year-end value.

Limitations

  • This is a planning estimate, not tax, legal, or investment advice. Your IRA custodian or plan administrator's RMD notice is the figure that matters.
  • Inherited IRAs, including the 10-year rule and the Single Life Table for eligible designated beneficiaries, are not calculated.
  • Roth IRAs have no lifetime RMDs for the original owner and are not modeled. Designated Roth 401(k) accounts also have no lifetime RMDs while the owner is alive.
  • A still-working exception can delay 401(k) or 403(b) RMDs if you are not a 5% owner. That exception is described, not applied automatically.
  • QCDs, Roth conversions, and the tax on the withdrawal itself are not computed.
  • If you miss an RMD, the excise tax is 25%, or 10% if you correct it in time. The calculator does not compute that tax.

Rounding

Each year's RMD is shown to the cent (nearest hundredth of a dollar). Publication 590-B examples sometimes round to the nearest dollar. The projection uses that rounded RMD, then grows the leftover balance at the rate you typed. The IRS tables themselves are used exactly as published — no interpolation.

What this RMD calculator does

A required minimum distribution is a yearly withdrawal the tax rules force from a traditional IRA, SEP IRA, SIMPLE IRA, 401(k), or 403(b) once you pass the start age. Roth IRAs have no lifetime RMDs for the original owner. This page divides last December 31's balance by the IRS factor for your age this year. Pair it with the retirement calculator if you are still projecting a nest egg, and with the inflation calculator if you want to know what the withdrawal buys later.

How to use it

  1. Enter the account value at the close of business on December 31 of last year — December 31, 2025 for a 2026 RMD.
  2. Enter your age as of your birthday in the distribution year, or your birth year. The birth year drives the start-age rule.
  3. Choose traditional IRA, 401(k)/403(b), or inherited IRA. Inherited accounts show a note instead of a lifetime-table RMD.
  4. If your spouse is the sole beneficiary and more than 10 years younger, switch on Table II and enter their age this year.
  5. Optionally add an expected growth rate to sketch later RMDs. Leave it at 0 to hold the leftover balance flat.

A worked example

Suppose the IRA was worth $500,000 on December 31, 2025 and you turn 75 in 2026. Table III lists 24.6 next to age 75. $500,000 ÷ 24.6 = $20,325.20. That is the default on this page. Publication 590-B uses the same factor in a $100,000 example and rounds to the nearest dollar ($4,065). This calculator keeps cents. Your custodian's statement is the amount to take.

When RMDs start: age 73 or 75

SECURE 2.0 moved the start age. Born 1950 or earlier: RMDs already started at 72. Born 1951–1959: they start at 73. Born 1960 or later: IRS FAQ materials say they start at 75. The statute raises the age to 75 for people who attain age 74 after December 31, 2032, which can be read to include some people born in 1959. This page follows the IRS reading that 1960 is the first birth year for age 75. Turning 73 in 2026 (born 1953) means 2026 is your first RMD year.

Which IRS table applies

Most owners use Table III, the Uniform Lifetime Table in Publication 590-B Appendix B — the same table as 26 CFR § 1.401(a)(9)-9 Table 2, in force from 2022. Use Table II only when your spouse is the sole beneficiary and more than 10 years younger. A 10-year gap still uses Table III. Table I is for inherited-account beneficiaries and is not applied here.

The first RMD can wait until April 1

You must take the first RMD for the year you reach the start age, but you may wait until April 1 of the next year. Later RMDs are due by December 31. If you wait, you take two withdrawals the next year, and both are taxable in the year received.

IRA versus 401(k), and inherited accounts

Calculate an RMD for each IRA, then you may take the total from one IRA. Each 401(k) or 403(b) must distribute its own amount. A workplace-plan participant who is still working and is not a 5% owner can often delay that plan's RMDs until the year they retire; a traditional IRA cannot. Inherited IRAs follow other rules: for deaths after 2019, most non-eligible beneficiaries must empty the account by the end of the tenth year after the year of death. Eligible designated beneficiaries may use Table I. This calculator will not invent those amounts.

If you miss the deadline

SECURE 2.0 cut the excise tax on a missed RMD from 50% to 25% of the amount not withdrawn, or 10% if you correct it in time — generally within two years. File Form 5329. This page does not compute the penalty.

What the result means

This year's RMD is the floor, not a cap. Extra withdrawn this year does not credit next year's RMD. The projection takes each RMD, then grows what is left at the rate you typed until the next December 31. For purchasing power, run a future RMD through the inflation calculator. The 2026 note on inflation and retirement savings walks through that gap between a growing balance and what it buys.

Common mistakes

  • Using today's balance instead of last December 31's close.
  • Using Table II when the spouse is only 10 years younger, or is not the sole beneficiary.
  • Treating an inherited IRA as if the original owner's Uniform Lifetime Table still applied.
  • Waiting until April 1 for the first RMD and forgetting that two RMDs then fall in the same calendar year.
  • Assuming extra withdrawn this year reduces next year's required amount. It does not.
  • Taking IRA RMDs from a 401(k), or 401(k) RMDs from an IRA, as if the accounts were interchangeable.

When this calculator is useful

Use it in November and December to size the 2026 withdrawal before the December 31 deadline, or to see whether waiting until April 1 for a first RMD is worth taking two distributions next year.

A note on advice

This page applies IRS Publication 590-B and the 2022 life-expectancy tables to the numbers you type. It is not tax, legal, or investment advice. Confirm the amount with your IRA custodian or plan administrator before you withdraw.

FAQ

What is a required minimum distribution?
The smallest amount you must withdraw each year from a traditional IRA or most workplace plans once you reach the start age. You can take more. Roth IRAs have no lifetime RMDs for the original owner.
At what age do RMDs start in 2026?
Age 73 if you were born in 1951–1959, and age 75 if you were born in 1960 or later, following IRS FAQ materials. People born in 1950 or earlier already started at 72.
How is the 2026 RMD calculated?
Divide the account balance on December 31, 2025 by the IRS factor for your age in 2026. At 75, Table III uses 24.6, so $500,000 ÷ 24.6 = $20,325.20. Use Table II instead only if your spouse is the sole beneficiary and more than 10 years younger.
Can I delay my first RMD until April 1?
Yes, for the year you reach the start age. Later RMDs are due by December 31. If you delay the first one, you take two RMDs the next year.
What happens if I miss an RMD?
The excise tax is 25% of the amount not withdrawn, or 10% if you correct it in time, generally within two years. File Form 5329. The IRS may waive the tax for a reasonable error that you are fixing.
Do inherited IRAs use this calculator?
No. Most inherited IRAs for deaths after 2019 must be emptied under a 10-year rule. Eligible designated beneficiaries may use the Single Life Table. This page does not invent those amounts.
Can I take all of my IRA RMDs from one account?
Yes for traditional, SEP, and SIMPLE IRAs: calculate each RMD, then take the total from one or more of those IRAs. 401(k) and 403(b) RMDs must be taken from each plan separately.
Can I share or download a calculation?
Yes. Use Share to copy a link that reopens the same inputs, or Download to save this year's RMD and the projection table as a text file.

Related calculators

Read more on the blog